| Parameter |
Value |
Comments |
|
| |
| 5010 |
0 |
(00000000) |
| 5012 |
0 |
(00000000) |
| |
|
|
| 5011 |
11000101 |
= 2400 For other Baud Rates see the table below |
| 5013 |
11000101 |
= 2400 For other Baud Rates see the table below |
| |
|
11000011 = 600
11000100 = 1200
11000101 = 2400
11000110 = 4800 |
| 5016 |
xx10xxxx |
x = do not change |
| RTS |
Line 1 |
|
| |
|
In the DNC software select RTS/CTS flow control |
Cable shown here works with xOn/xOff (DC1/DC3) flow control and RTS/CTS (Hardware flow control so should work in most cases.
But if you're sure your CNC does not use any flow control - or requires only xOn/xOff then you may use the the simpler 3 wire cable. Diagram here. |
RS232 Cable.
9pin computer to 25pin CNC
|
